Drive System Maintenance; Adjusting The Traction-Pedal Angle; Changing The Planetary-Gear-Drive Oil - Toro Groundsmaster 4000 Operator's Manual

Figure 90
1. Cab fuse box
Figure 91
g032673
2. Fuses
decal117-2787
Drive System
Maintenance
Adjusting the
Traction-Pedal Angle
1. Loosen the 2 nuts and bolts securing the left side
of the traction pedal to the bracket
1. Traction pedal
2. Pivot the pedal to the desired operating angle
and tighten the nuts
Changing the
Planetary-Gear-Drive Oil
Service Interval: After the first 200 hours
Every 800 hours or yearly, whichever comes
first.
Use a high-quality, SAE 85W-140 gear lube.
1. With the machine on a level surface, position a
wheel so a check plug is at the lowest (6 o'clock)
position (Figure
66
(Figure
Figure 92
2. Mounting nuts and bolts
(Figure 92).
93).
92).
g009745