Installation and wiring
2.7
Communication connectors and terminals
2.7.1
PU connector
Mounting the operation panel or parameter unit on the enclosure surface
Having an operation panel or a parameter unit on the enclosure surface is convenient. With a con-
nection cable, the operation panel or the parameter unit can be mounted to the enclosure surface
and connected to the inverter.
Use the option FR-CB2 , or connectors and cables available on the market.
To mount the operation panel (FR-DU08, FR-LU08), the optional connector (FR-ADP) is required.
Securely insert one end of the connection cable until the stoppers are fixed.
Parameter unit (FR-PU07)
Fig. 2-45:
NOTES
Refer to the following table when fabricating the cable on the user side. Keep the total cable
length within 20 m.
Commercially available products (as of February 2015)
Name
Communication cable
RJ-45 connector
Communication operation
Using the PU connector enables communication operation from a personal computer, etc. When the
PU connector is connected with a personal, FA or other computer by a communication cable, a user
program can run to monitor the inverter or read and write parameters.
Communication can be performed with the Mitsubishi inverter protocol (computer link operation).
For the details, refer to page 5-620.
FR-A800
Operation panel
(option)
(FR-DU08)
Operation panel (FR-LU08)
(option)
Connecting a parameter unit or the operation panel using a connection cable
Communication connectors and terminals
Parameter unit connection cable
(FR-CB2 )(option)
Operation panel connection
connector
(FR-ADP) (option)
Model
SGLPEV-T (Cat5e/300 m) 24AWG × 4P
5-554720-3
Manufacturer
Mitsubishi Cable Industries, Ltd.
Tyco Electronics
I002382E_F
2 - 67