Sony DVS-9000SF User Manual page 255

5
Press [Set] to confirm the selection.
This assigns the region to the region selection button in the numeric
keypad control block.
Note
Only the regions assigned here can be used for snapshot recall.
When an M/E bank is not assigned to a region selection button in the
numeric keypad control block, it is not possible to recall a snapshot with
the Flexi Pad control block of that M/E.
To set the region selection buttons selected when the [ALL] button
is pressed
Use the following procedure.
1
In the 10 Key Region Assign menu, press [All Select] in the button area,
or the [All Select] button indication in the status area, turning it on.
The [All Select] button indication in the status area turns orange, and the
region selection button indication in the status area changes to the mode for
assigning region selection buttons to the [ALL] button. In the factory
default setting, all buttons appear in reverse video, and are assigned to the
[ALL] button.
2
To remove a button from the assignment to the [ALL] button, press the
button indication, turning it off.
The button you pressed changes to a normal indication.
To return the region assignments to the factory default
In the 10 Key Region Assign menu, press [Default].
This returns the assignments of the region selection buttons in the numeric
keypad control block to the factory default.
To clear a region assignment
Use the following procedure.
1
In the 10 Key Region Assign menu, press the indication for the button to
which the region is assigned.
The button you pressed turns to reverse video.
2
Press [Clear].
This clears the assignment of the selected button, which is now no longer
assigned.
Setup Relating to Operations From the Control Panel
255