Gpi Input Setting (Gpi Input Assign Menu) - Sony DVS-9000SF User Manual

2
3
4
Releasing the assignment of a GPI input port
Use the following procedure.
1
2
3
4

GPI Input Setting (GPI Input Assign Menu)

To set the trigger type and so on for each GPI input, display the DCU>GPI
Input Assign menu.
To display the GPI Input Assign menu
In Engineering Setup, select VF5 'DCU' and HF2 'GPI Input Assign.'
The GPI input port setting status appears in the status area.
324
Setup Relating to DCU
In the <Parallel Input Assign> group, press [GPI Input].
Using any of the following methods, assign the number of the GPI input to
the input port.
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs.
Knob Parameter
1 Parallel Input
3 GPI Input
To confirm the assignment in step 3, press [GPI Input Set].
This assigns the GPI input, and this is reflected in the status area.
In the DCU>Input Config menu, select what the setting applies to (DCU1
or DCU2) from the <DCU Select> group.
In the <Parallel Input Assign> group, if [GPI Input] is on, press it to turn
it off.
Turn the knobs to adjust the following parameters.
Knob Parameter
1 From No
2 To No
In the <Parallel Input Assign> group, press [No Assign].
Adjustment
Input port
GPI input
Adjustment
First port number
Last port number
Setting values
1 to 102
1 to 50
Setting values
1 to To No
From No to 102