Sony DVS-9000SF User Manual page 77

To apply the Blind effect
With the Blind menu displayed, use the following procedure.
1
In the <Mode> group, select [Bar] or [Wedge].
2
To make transition settings, press [Transition] and set the following
parameters.
Knob
1
2
3
To set the partition method, press [Partition] and set the following
parameters.
• When Bar was selected in step 2
Knob
1
2
3
• When Wedge was selected in step 2
Knob
4
5
To set the wedge center position
When Wedge is selected in the <Mode> group, you can set the wedge center
position.
1
Press [Position].
2
Set the following parameters.
Knob
1
2
Split settings
The Split effect splits the image upper and lower, left and right.
Parameter Adjustment
Rotation Number of rotations of the blocks
Perspective Degree of randomness in distance
moved by each block
Parameter Adjustment
Width Width of partition
Offset Degree of randomness in partition
width
Angle Starting angle of effect
Parameter Adjustment
No Width of blocks
Phase Partition position
Parameter Adjustment
H Horizontal center position
V Vertical center position
Setting values
–8.000 to +8.000
0.000 to 100.000
Setting values
0.000 to 100.000
–5.000 to +5.000
–8.000 to +8.000
Setting values
0.000 to 100.000
–8.000 to +8.000
Setting values
–8.000 to +8.000
–6.000 to +6.000
DME Special Effect Operations
77