Replacing The 2.5-Inch Hdd/Ssd Sas/Sata Backplane; Preliminary Steps - Fujitsu PRIMERGY CX400 M4 Upgrade And Maintenance Manual

Hard disk drives (HDD), solid state drives (SSD) and 2.5-inch PCIe-SSD
7.5 Replacing the 2.5-inch HDD/SSD SAS/SATA
backplane
Field Replaceable Unit
(FRU)
Tools: Preliminary and concluding steps: Phillips PH2 / (+) No. 2 hexagonal
cross SW5 / PZ2
Main steps: tool-less
7.5.1

Preliminary steps

Perform the following procedures:
Ê Shut down the server nodes as described in section
server node" on page 40
"Disconnecting the power cord" on page 41
Ê
Ê Remove all HDD/SSD modules from the relevant HDD/SSD cage as
described in section
"Extending the server enclosure out of the rack" on page 43
Ê
"Opening the server enclosure" on page 50
Ê
Ê Remove the fan modules as described in section
module" on page
CX400 M4
"Removing 2.5-inch HDD/SSD modules" on page
131.
Upgrade and Maintenance Manual
Hardware: 15 minutes
"Shutting down the
"Removing the fan
98.
103