Basic Software Procedures; Starting The Maintenance Task; Switching On The Id Indicator - Fujitsu PRIMERGY CX400 M4 Upgrade And Maintenance Manual

5

Basic software procedures

5.1

Starting the maintenance task

5.1.1

Switching on the ID indicator

For easy identification of the server, switch on the ID indicator, especially when
working in a datacenter environment or a server room. The ID indicator can also
be activated via the iRMC web interface and its status is reported to the BMC.
I
For more information, see section
page 37 or the "ServerView Suite Local Service Concept (LSC)" and
iRMC user guides.
Using the ID button on the front panel
Ê Press the ID button on the front panel to switch on the system identification
LEDs.
I
For more information, see section
front of the server enclosure" on page
Using the ID icon in the iRMC web interface
Ê Log in to the iRMC S5 web interface.
The icon that represents the ID indicator LED resides on the right of the
menu bar. Its color symbolizes its status:
blue: the ID LED is on.
grey: the ID LED is off
Ê Click the icon to switch the ID indicator LED on or off.
Using ServerView Operations Manager
Ê In ServerView Operations Manager Single System View press the Locate
button in the title bar to switch on the ID indicators.
CX400 M4
Upgrade and Maintenance Manual
"Locating the defective server" on
"Controls and indicators on the
183.
73