Removing The Cx2570 M4 Server Node - Fujitsu PRIMERGY CX400 M4 Upgrade And Maintenance Manual

Basic hardware procedures
4.5.2

Removing the CX2570 M4 server node

V
CAUTION!
Shut down the server node and disconnect all external cables.
●
Follow the safety instructions in the chapter
●
on page
Figure 7: Removing the CX2570 M4 server node
Ê Undo the locking mechanism (1) of the release lever and pull the server
node out of the bay (2).
V
CAUTION
If the server node is difficult to pull out of the bay, push the server node,
and then pull the server node while pushing the server node to the left
side.
Figure 8: Removing the CX2570 M4 server node
48
25.
Upgrade and Maintenance Manual
"Important information"
CX400 M4