Installing The Rack-Mounted Device; Notes On Installation - Siemens SIPROCESS GA700 Quick Start Manual

Continuous gas analysis

Hide thumbs Also See for SIPROCESS GA700:

Table of Contents

3.2

Installing the rack-mounted device

3.2.1

Note

Protect the rack-mounted device against:

• Direct thermal radiation

• Mechanical damage

• Vibrations

• Dirt deposits

• Ingress of dust

• Corrosive media

• Moisture

• Strong and rapid temperature fluctuations

• Strong air flow

The installation location should be:

• Easily accessible

• Vibration-free

• Within the ambient temperature limits

Note

Air circulation

Ensure that a heat accumulation does not occur at the installation location. Ensure that

sufficient air circulates around the rack-mounted device.

Do not cover ventilation slots.

When installing more than one rack-mounted device, observe a distance of ≥1 height unit

(4.4 cm) upwards to the next device.

Quick Start

Compact Operating Instructions, 01/2013, A5E31805656-01

3.2 Installing the rack-mounted device

Installing

Table of Contents