Settings > Time/Date; [2.02] Settings > Time/Date - Siemens SIPROCESS GA700 Quick Start Manual

Commissioning
7.5 [2.02] Settings > Time/date
7.5 [2.02] Settings > Time/date
Procedure
Note
Effects of changes
Changing the time has a direct effect on the sequence of logbook entries and all other time-
based device services.
Check the logbook entries following changes to this setting. If necessary, reset the
parameters of the logbook filter function.
1. Main menu > "2 Settings" > "02 Time/Date"
2. Specify display format of the date: "Date format" parameter field.
3. Enter the current date: "Date" parameter field.
4. Enter the current time: "Time" parameter field.
5. Enable/disable automatic switching to daylight saving time: "Daylight saving time"
50
This parameter field can be edited without PIN input.
Authorize access with Standard PIN, if necessary.
parameter field.
Select one of the alternatives:
Setting Description
Off Automatic switching is disabled.
Autom. EU Automatic switching to CEST ("Central European Summer Time") on the last
Sunday in March. The CEST ends on the last Sunday in October.
Autom. US Switching to U.S. DST ("Daylight Saving Time") on the second Sunday in March.
DST ends on the first Sunday in November.
Compact Operating Instructions, 01/2013, A5E31805656-01
Quick Start