Setting Digital Inputs - Siemens SIPROCESS GA700 Quick Start Manual

7.7.2

Setting digital inputs

Procedure
1. Main menu > "2 Settings" > "09 Inputs/outputs" > "3 Digital inputs"
2. Open selected digital input: press <ENTER>.
3. Set the trigger: "DI active for" parameter field.
Quick Start
Compact Operating Instructions, 01/2013, A5E31805656-01
Up to 20 digital inputs can be assigned, depending on the hardware of your device. A
navigation line with the following structure is assigned to each digital input:
Structure of the navigation line for each digital input
Navigation no. DI name
1)
Standard: Digital inputs 01 to 08. With option module 1 also: Digital inputs 17 to 20. With option
1)
module 2 also: Digital inputs 09 to 16.
Display for function "Measuring range n" only
2)
Display for externally controlled functions only
3)
The factory-set parameter display of a digital input whose parameters have not yet been
assigned has two parameter fields:
– "DI active for" parameter field, setting "High"
– "Function (pre-selection)" parameter field, setting "Free"
Use the information under Overview of digital inputs (Page 55) when setting the activation
level.
Function Component
Commissioning
7.7 [2.09.3] Digital inputs
Additional text
2) 3)
Edit
59