Maintenance & Diagnostics > Identification; [3.09] Maintenance & Diagnostics > Identification; Overview - Siemens SIPROCESS GA700 Quick Start Manual

7.3 [3.09] Maintenance & diagnostics > Identification
7.3.1

Overview

This function gives you read access to data pertaining, in particular, to the hardware and
firmware of your device. Identification data refer either to the basic device or to a module.
The data enable the unique identification of your device. Have the identification data
available when you contact service.
The menu shows the devices recognized in the module. The navigation lines are structured
as follows:
Table 7- 1
Structure of the navigation lines
01.
02.
03.
03.
04.
06.
07.
07.
08.
1)
See also
Identifying a device (Page 46)
Identifying an analyzer module (Page 47)
Identifying additional features (Page 48)
Quick Start
Compact Operating Instructions, 01/2013, A5E31805656-01
Exemplary menu structure
Device (PU)
AM1
Measuring head
2)
2)
AM2
Measuring head
2)
2)
Only the currently recognized equipment is displayed. The menu numbering is not adapted.
Variable: Menu numbers 03 to 08.
7.3 [3.09] Maintenance & diagnostics > Identification
1)
Detector 1
Detector 2
Detector 1
Detector 2
Commissioning
SIPROCESS GA 700
Edit ►
OXYMAT 7
O2
CO2
NO
OXYMAT 7
O2
CO2
CO
45