WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Align the tabs on the computer cover with the slots on the chassis and slide it towards the front of the computer until it snaps into
place.
2
Replace the two screws (#6-32xL6.35) that secure the computer cover to the chassis.
3
Place the computer in an upright position.
Replacing the computer cover
computer. After working inside your computer, follow the instructions in
After working inside
www.dell.com/
Replacing the computer cover
5
13