Removing The Thermal-Cooling Assembly; Prerequisites; Procedure - Dell Inspiron 3470 Service Manual

Removing the thermal-cooling assembly

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•

Prerequisites

•

Procedure

Prerequisites
1 Remove the computer cover.
2 Remove the fan shroud.
Procedure
1 Disconnect the processor-fan cable from the system board.
2 Loosen the captive screws that secure the thermal-cooling assembly to the system board.
3 Lift the thermal-cooling assembly off the system board.
computer. After working inside your computer, follow the instructions in After working inside
www.dell.com/
Removing the thermal-cooling assembly
30
55