WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1
Connect the antenna cables to the wireless card.
2
Align and place the wireless-card bracket on to the wireless card.
3
Align the notch on the wireless card with the tab on the wireless-card slot and slide the wireless card at an angle into the wireless-card
slot.
4
Replace the screw (M2xL3.5) that secures the wireless card to the system board.
Post-requisites
1
Follow the procedure from step 5 to step 8 in
2
Replace the
front
bezel.
3
Replace the
computer
cover.
Replacing the wireless card
computer. After working inside your computer, follow the instructions in
"Replacing the optical
www.dell.com/
drive".
Replacing the wireless card
21
After working inside
41