WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1
Route the power-button board cable through the slot on the front panel.
2
Connect the power-button board cable to the system board.
3
Slide the ports on the front-I/O bracket into the slots on the chassis and align the screw holes on the front-I/O panel with the screw
holes on the chassis.
4
Replace the screw (#6-32xL6.35) that secures the front-I/O bracket to the chassis.
Replacing the power-button module
computer. After working inside your computer, follow the instructions in
After working inside
www.dell.com/
Replacing the power-button module
27
49