WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1
Align and replace the optical-drive bezel to the optical drive.
2
Slide the optical drive into the optical-drive cage
3
Align the screw holes on the optical drive with the screw holes on the drive cage and replace the three screws (M2xL2) that secure
the optical drive to the drive cage.
4
Place the drive cage on the chassis.
5
Connect the data cable and power cable to the optical drive.
6
Connect the data cables and power cables to the hard drives.
Replacing the optical drive
computer. After working inside your computer, follow the instructions in
15
After working inside
www.dell.com/
Replacing the optical drive
31