Dell Inspiron 3470 Service Manual page 73

Security
HDD Password Status
Admin Password
System Password
HDD Password
Password Change
Computrace
PTT ON
PPI Bypass for Clear Command
UEFI Firmware Capsule Updates
Table 6. System setup options—Boot menu
Boot
Boot List Option
File Browser Add Boot Option
File Browser Del Boot Option
Secure Boot
Boot Option Priorities
Boot Option #1
Boot Option #2
Table 7. System setup options—Exit menu
Exit
Save Changes and Reset
Discard Changes and Reset
Restore Defaults
Discard Changes
Save Changes
Displays if the hard drive password is set.
Enables you to set the admin password.
Enables you to set the system password.
Enables you to set the hard drive password.
Enable or disable changes to the System and Hard Disk
passwords when an administrator password is set.
Enable or disable tracking assets and providing recovery
services in the event the computer is lost or stolen.
Default: Deactivate
Enables you to enable or disable the Intel Platform Trust
Technology (PTT).
Default: Disabled
Allows you to control the TPM Physical Presence Interface
(PPI). When enabled, this setting will allow the OS to skip BIOS
PPI user prompts when issuing the Clear command. Changes to
this setting take effect immediately.
Default: Disabled
Enables you to enable or disable the UEFI Firmware Capsule
Updates function.
Default: Enabled
Displays the available boot devices.
Enables you to set the boot path in the boot option list.
Enables you to delete the boot path in the boot option list.
Enables you to enable or disable the secure boot control.
Default: Disabled
Displays the available boot devices.
Displays the first boot device.
Displays the second boot device.
Enables you to exit system setup and save your changes.
Enables you to exit system setup and load previous values for
all system setup options.
Enables you to load default values for all system setup options.
Enables you to exit your changes.
Enables you to save your changes.
System setup 73