Modes/Jumper Assignments Of The Im 300 - Siemens S5-155U System Manual

7.1.2
Modes/Jumper
Assignments of the
IM 300
Jumper assignments
Purpose of the jumpers
System Manual
C79000-B8576-C199-03
IM 300-3
16
12
1
X3
LED 1
Figure 7-2 Locations of Jumpers on the IM 300-3 (when Delivered)
You must insert an additional jumper 4-13 at location 12 for address
setting in the extended I/O area (O area).
Jumper 1 is open and has no function for operation in the
S5-135U/155U PLC.
The 300 and 312 Interface Modules
9
8
X1
X2
J 1
7
7 - 7