Table of Contents
Advertisement
Installing the side racks
1. Insert the twin pegged side into the
Installing the side racks
rear access holes provided, ensuring
Installing the side racks
1.
Insert the twin pegged side into the rear access holes
pegs are fully inserted.
1.
provided, ensuring pegs are fully inserted.
Insert the twin pegged side into the rear access holes
2. Then locate the front peg into the front
provided, ensuring pegs are fully inserted.
2.
Then locate the front peg into the front access hole
access hole and push in firmly.
2.
Then locate the front peg into the front access hole
and push in firmly.
and push in firmly.
Installing the side racks
1.
Insert the twin pegged side into the rear access holes
provided, ensuring pegs are fully inserted.
Installing the side racks
2.
Then locate the front peg into the front access hole
1.
Insert the twin pegged side into the rear access holes
and push in firmly.
provided, ensuring pegs are fully inserted.
2.
Then locate the front peg into the front access hole
and push in firmly.
Fitting the shelves and grill dish
carrier between the side rack
wires
The shelves are designed so that they
have maximum extension but cannot be
accidentally pulled right out. The grill dish
carrier is designed the same way and
can slot straight into the side racks. To fit
a shelf or grill dish carrier to side racks:
1. Locate the rear edge of the shelf/
carrier in between guide rails of the
side rack - see diagram.
2. Ensure the same rail positions on both
sides of the oven are being engaged.
With the front edge raised, begin to
slide the shelf into the oven.
3. Once the detents have passed the
front edge of the side rack, the shelf
can be pushed completely in. When
fully inserted the shelf/carrier should
not interfere with the closed oven door.
Positioning the dishes on the
grill dish carrier
Positioning the dishes on the grill dish carrier
Positioning the dishes on the grill dish carrier
Positioning the dishes on the grill dish carrier
Positioning the dishes on the grill dish carrier
Fitting the shelves and grill dish
carrier onto telescopic slides
To fit a shelf or grill dish carrier to
telescopic slides:
1. With the slides fully pushed in, push
the shelf/carrier along the top of the
slide until it hits the back post.
2. Drop the front of the shelf/carrier
ensuring it sits behind the front post of
the slide (see illustration). When fully
inserted the shelf/carrier should not
interfere with the closed oven door.
9
9
English
20
9
9
Hide quick links:
Advertisement
Table of Contents
