Dew Point Sensor With The Beko Digital Type; Marking And Setting Text Fields - Beko METPOINT BDL compact Instructions For Installation And Operation Manual

14.3.2.6 Dew point sensor with the BEKO digital type

First step: select a free sensor channel
Main menu  Settings  Sensor settings  B1
Second step: Select type BEKO Digital
Main menu  Settings  Sensor settings  B1  Type text field  BEKO digital
Third step: confirm twice with
Now, you can determine a
settings (see Chapter
ter 12.2.2.3 Recording measuring
ter 12.2.2.2 Denoting the measuring data and Determining the resolution of the decimal
Main menu  Settings  Sensor settings  B1
BEKO-Digital

14.3.2.7 Marking and setting text fields

Main menu  Settings  Sensor settings  A1
44
OK
name (see Chapter
12.2.2.4 Alarm settings)
data), as well as the
-9.2
°Ctd
9.5
% rF
22.6
°C
Operation METPOINT® BDL compact
12.2.2.7 Marking and setting text
and recording settings
resolution of the decimal places
The METPOINT® BDL compact recognizes
whether
sensor is a flow rate or a dew point sensor from
BEKO TECHNOLOGIES and automatically
sets the
correctly.
Note
This does not apply to the sensors
(SD21/23 and SP21/22)
If the data logger is activated, the following win-
dow appears. By pressing
can be deactivated.
(only activated when settings and recordings were already
implemented)
Note:
When sensor settings are implemented or
changed, the data logger must be on STOP.
fields), the alarm
(see Chap-
(see Chap-
places).
the connected
BEKO digital subtype
yes, the data logger
METPOINT® BDL compact