Table of Contents
Advertisement
Operation METPOINT® BDL compact
14.3.4 Brightness
Main menu Settings Brightness
Note: at the first touch, the
Afterwards, "normal" functional operation is possible again.
Important: when the
Darken-after
the currently set brightness.
14.3.5 Cleaning
Main menu Settings Cleaning
METPOINT® BDL compact
brightness
in our example is reset to 50%.
button is not activated, the backlighting is continuously on, at
Here, the desired
brightness
(15 ... 100%) of the display can directly be set.
E.g.:
brightness
to 50%.
Zum .Beispiel:
Helligkeit
By means of the
Darken-after
brightness
can be reduced to a minimum at the
end of a time interval to be defined (here after
15 minutes).
As soon as the dimmed screen is activated
again, the
brightness
automatically goes back
to the value that was last set prior to dimming.
This function can be used to clean the touch
panel during the running measurements.
If one minute does not suffice for the clean-
ing process, the procedure can be repeated
at all times.
If the cleaning process is completed before,
it can be stopped by pressing the
press-for-canceling
button for one to two
seconds.
auf 50%
button, the
Long-
69
Advertisement
Table of Contents
