Table of Contents
Advertisement
14.3.3.7.5 Reset factory defaults
Main menu Settings Device settings System Reset factory defaults
14.3.3.8 Calibrating the touch screen
Main menu Settings Calibration touch screen
68
Operation METPOINT® BDL compact
If required, the BDL can be re-booted by
pressing the
Restart
If required, the screen calibration can be changed
here.
Press
Calibrate,
and a calibration cross will ap-
pear 1. on the upper left, 2. on the lower right,
and 3. in the middle. These crosses must be
pressed consecutively.
When calibration is completed and the indica-
tion is averaged, confirm with OK.
If this is not the case, calibration can be re-
peated by means of
Calibrate
again.
METPOINT® BDL compact
button.
Cancel
and by pressing
Advertisement
Table of Contents
