Initial Setting - Sanyo PJ-Net Organizer Plus POA-PN40 Owner's Manual

Chapter 3 Basic Setting and Operation

Initial setting

After installing this product to the projector, perform the following
basic initial setting.
Click Initial Setting on the main menu to display the initial setting page.
There are two sub menus, Initial setting and Serial Port setting sub
menu. PIN code, Temperature unit, Date and Time can be set on Initial setting page,
and Serial Port setting page is used for controlling the external equipment through
the RS-232C serial port. For further description of setting and operation, refer to
chapter 5 "Use of Serial Port" (☞p.61)
The model name of the projector on which this product is mounted is displayed on
the page.
Caution
!
Use of Battery
This product provides a lithium battery. When the battery runs down, the clock and timer func-
tions do not operate properly. Contact your local dealer for the replacement of battery. The
replacement must be carried out by a qualified service personnel.
28
Item Description
Language ..........Switches display language on the setting page.
English o Japanese.
Model name.......Indicates the model name of the projector provided
with the Network Unit
Network PIN code...Sets the network PIN code to login the setting page
(☞p.29)
PJLink................Switches PJLink password authentication on or off
(☞p.29)
Password ...........Password for PJLink function
Temperature ......Switches display temperature unit Centigrade or
Fahrenheit