Up to 99,999 hours can be set for the time setting.
✐
Trap
Item
Description
Community name ...Enter community name to send "Trap". Default
name is "public".
Trap address......Enter IP address of the SNMP manager computer
to receive "Trap".
Trap check/delete
Check and delete the trap address
Checking the registered trap address and deleting the
address.
To delete the address, tick check box in front of the IP
address and click Delete button.
✐ Up to 10 trap addresses can be registered.
Trap option
Trap option setting
Tick check boxes in front of the condition item to send
the trap.
✐ Click
button if you tick or un-tick the check box on a page.
Set
[1]–––––––––––––––––––––––––––––––––––
When PJ lamp is off.
❏
When the life span of lamp is reached.
❏
When internal PJ power circuit is failed.
❏
When internal PJ temperature is too high.
❏
When PJ is turned off with power ON/OFF but-
❏
ton.
[2]–––––––––––––––––––––––––––––––––––
When Power management function turns PJ
❏
lamp off.
When the signal is interrupted.
❏
When lamp Corres. Value reaches [
❏
SNMP setting
] hours.
37
PJ-NET ORGANIZER
OWNER'S MANUAL