Setting Examples For The Serial Control - Sanyo PJ-Net Organizer Plus POA-PN40 Owner's Manual

Setting examples for the serial control

Setting for controlling the equipment connected to the
serial port from the computer.
:Selects "External"
Serial Control
:Sets according to the computer specified port
Port number
no. Do not use port number 10000*
:Sets according to the communication condition
Other Settings
of the equipment
Setting for controlling the projector from the serial con-
troller connected to the serial port.
:Selects "Projector"
Serial Control
Port number :Not specified. Do not use port number 10000*
:Sets according to the communication condition
Other Settings
of
Setting for controlling the projector from the computer
through the LAN port.
Serial Control :Not specified
:Not specified
Port number
Other Settings :Not specified
* The port number of the computer must be used with 10000.
*2 The reserved port numbers are http (80), ftp (21), SNMP (25), POP3 (110) etc. The port num-
ber 10000 is reserved to control the projector through the LAN port.
✐ Exclusive driver software for control of the external equipment is required. This product does
not provide any driver software. Please consult your local dealer.
✐ There are 2 types of RS-232C serial cable, Normal(Straight) and Reverse(Cross) type. Usually,
when connecting between this product and a projector or a computer, use Reverse type of
serial cable. When connecting DVD player etc., use Normal type.
the serial controller
.
2
.
2
PJ-NET ORGANIZER
OWNER'S MANUAL
Serial port setting
63