Sanyo PJ-Net Organizer Plus POA-PN40 Owner's Manual page 53

Notes on timer setting
✐ Up to 10 timer events can be registered. Timer events always operate according to the next
valid event depending on the projector's power status. In the example below, event 3 turns
on the projector so next event 4 (also turning on projector) will not be effective because the
projector is already turned on. Similarly, when the projector is turned off by event 5, event 6
OFF will not be effective in turning it off again. But these secondary events (event 4 and event
6) will become effective if a person turns off the projector (after event 3 and before event 4) or
turns on the projector (after event 5 and before event 6).
Projector Power
Event 1
Event 2
Event 3
Event 4
Event 5
Event 6
✐ When the timer events are set at the same time, the last event set will override the previous
events. For example, if there is an event like "ON at 8:00 everyday" and then new event is set
like "OFF at 8:00 everyday", only the last setting event is effective.
✐ When the timer event
projector cannot be turned on during this cooling down period.
✐ The timer operates by using the clock function provided in this product. Before setting the
timer, please confirm that the current date and time are set correctly. Timer and clock func-
tions are functioning using a lithium battery provided in this product. When the battery runs
down, the clock and timer functions will not operate correctly. Consult your local dealer for the
replacement of battery. The replacement must be carried out by a qualified service personnel.
ON
ON
OFF
Time
occurs during cooling down period, this is invalid event because the
ON
Invalid event Invalid event
ON
ON
ON
OFF
OFF
Timer setting
53
PJ-NET ORGANIZER
OWNER'S MANUAL