Setting up the projector
Click Setting on the main menu. This function is to set up the projector.
Select the sub menu [Screen setting] or [Setting] and then set up each
setting.
Item
Screen ...............Switches the screen mode. (Full, Zoom, Normal,
Ceiling................Sets the image top/bottom and left/right reversed.
Rear...................Sets the image left/right reversed. (ON, OFF)
✐ The mark "
selected input source system. The error message appears
when selecting the disabled screen mode indicated with "*".
Description
Natural wide, True) There may not be available
mode depending on the input mode as shown in
the table below.
(ON, OFF)
Input source
Screen mode Video Computer
Full
✔
Zoom
✔
Normal
✔
Natural wide
✔
True
*
" means that the available screen mode in the
✔
Setting up the projector
✔
*
✔
*
✔
PJ-NET ORGANIZER
OWNER'S MANUAL
47