Restore Hba Bios Setup Data - Hitachi GVX-CC64GxBX series User Manual

-d: Specifies the logical device. (It is not possible to use it together with -a.)
-a: Backs the HBA BIOS setup data of all ports to HBA installed in the system up.
(It is not possible to use it together with -d.)
-f: Specifies the stored directory of the backup file
-c: Skips the confirmation of Y/N.
In the following, we show the execution example in Windows.
# hfcbios -d scsi4 –o backup –f C:\
hfcbios Ver. X.X.X.X Copyright(C) 2006. Hitachi, Ltd.
Current Configure : scsi4
HBA BIOS
BOOT PRIORITY
Backup is OK?
(Y/N) : y
Backup of c:\\30091054.02.00.00.00.BK succeeded for scsi4.

Restore HBA BIOS setup data

Restore various setup data of HBA BIOS.
Please move to directory that install the utility software, and execute the following
commands. It displays the HBA BIOS setup data being set now, and please back up
HBA BIOS setup data after confirming set values with "Table setup items and values".(*)
(*)There is a possibility that correct data cannot be acquired in the adapter that does not
work normally when executing it. Please note that there is a possibility that the adapter
does not work normally when the data is restored.
Windows:
# hfcbios [-c] -d logical device name –o restore –f restored file name
Linux:
# ./hfcbios [-c] -d logical device name –o restore –f restored file name
-f: Specifies the restored path.
-c: Skips the confirmation of Y/N.
: ENABLE
: ENABLE
・
・
・
126