Table of Contents
Advertisement
(Step 2) Set QueueDepth of hfcldd0 to 20.
Figure Procedure to set a QueueDepth value to the specified port
# ./hfcmgr -p hfcldd0 qd 20
Time:xxxx/xx/xx xx:xx:xx
Succeeded.
Update the RAMDISK image for the changes to take effect permanently.
Reboot your system for the changes to take effect.
# ./hfcmgr -p hfcldd0
:
Queue Depth
:
#
(Step 3) Set 10 as common QueueDepth value to all other ports.
Figure Procedure to set a common QueueDepth value to all other ports
# ./hfcmgr -p all qd 10
Time: xxxx/xx/xx xx:xx:xx
Succeeded.
Update the RAMDISK image for the changes to take effect permanently.
Reboot your system for the changes to take effect.
# ./hfcmgr -p all
Time: xxxx/xx/xx xx:xx:xx
---------------------------------------
Common Setting of All HBA port
---------------------------------------
Max Transfer Size
Link Down Time
Reset Delay Time
Preferred AL-PA
Reset Timeout
Abort Timeout
Abort Restrain
Target Restrain
Queue Depth
Machine Check
Allowed
LUN Reset Delay
Interrupt Type
Logging Mode
Login Target Filter
Link Reset Mode
NPIV
NPIV vport count
Exchange per Core
Additional Performance Monitor: -
#
(Step 4) Reboot after updating RAMDISK image.
This result indicates that the QueueDepth
parameter is set to 20 but the driver is
currently using the value 32 for the
: 32 (20)
parameter.
: -
: -
: -
: -
: -
: -
: -
: -
: 10
: -
: -
: -
: -
: -
: -
: -
: -
: -
: -
34
Advertisement
Table of Contents
