Confirm Hba Bios Parameters - Hitachi GVX-CC64GxBX series User Manual

Confirm HBA BIOS parameters

Confirms various setup data of HBA BIOS.
Please move to directory that install the utility software, and execute the following
commands. It displays the HBA BIOS setup data being set now, and please back up
HBA BIOS setup data after confirming set values with "Table setup items and
values"(P94).
Windows:
# hfcbios -d logical device name –o cfgshow
Linux:
# ./hfcbios -d logical device name –o cfgshow
In the following, we show the execution example in Windows.
# hfcbios -d scsi4 –o cfgshow
hfcbios Ver. X.X.X.X Copyright(C) 2006. Hitachi, Ltd.
Configure Show : scsi4
HBA BIOS
BOOT PRIORITY
TARGET WWN
+---+------------------+-----+------------+
1 50060E8000C27992
2 0000000000000000
3 0000000000000000
4 0000000000000000
5 0000000000000000
6 0000000000000000
7 0000000000000000
8 0000000000000000
+---+------------------+-----+------------+
SPINUP DELAY
CONNECTION TYPE
DATA RATE
PERSISTENT BINDINGS
FORCE DEFAULT PARAMETER
Additional World Wide Port Name : 0000000000000000
LOGIN DELAY TIME
PRE CONFIGURE
: ENABLE
: ENABLE
LUN PRIORITY
00 HIGH
00
00
00
00
00
00
00 LOW
: DISABLE
: AUTO DETECTION (LOOP PREFERRED)
: AUTO DETECTION
: ENABLE
: DISABLE
: 3sec. (Max:60sec.)
(Default:3sec.)
: DISABLE
131