Table of Contents
Advertisement
[Detailed description]
Table Detailed description of hfcmgr –bk
No.
Item
1
BIOS
2
Boot Priority
3
Spinup Delay
4
Persistent Bindings
5
Forced Default Parameter
6
Additional WWPN
7
Pre Configure
8
Connection Type
9
Data Rate
10
Login Delay Time
(*1) Display the LUID information from the following hfcmgr version. Refer
display contents
・RHEL6: higher than or equal to 8.12
・RHEL7: higher than or equal to 9.11
・Windows: higher than or equal to 8.13
[Notes]
(1) This command cannot be used if operating on the LPAR manager of Hitachi Server
Virtualization Mechanism".
(2) You may not able to obtain correct data if executed on the adapter not running correctly.
Take note that the adapter may not be able to operate correctly if you restore the data.
(3) If hfcmgr version 8.0 to 8.7 is used and all of the HBA BIOS Setup Data on your system is
needed to backup, please specify 'force' parameter to the command.
(4) If hfcmgr version 8.0 to 8.7 is used, it might not displays Additional WWPNs stored on the
FLASH-ROM.
Description
Data set by "Display or Set the Boot Information, hfcmgr –b"
(*1)
Connection type set by "Display or Set the Port Information,
hfcmgr –p ct"
Link speed set by "Display or Set the Port Information, hfcmgr –p
sp"
Login Delay Time set by "Display or Set the Port Information,
hfcmgr –p lo"
60
here
for the
Advertisement
Table of Contents
