Table of Contents
Advertisement
(2) Update the FLASH-ROM.
# ./hfcmgr -f all update /root/54100A30.220742.EF.500008700030F17A.BK
Time:XXXX/XX/XX XX:XX:XX
hfcmcup Ver. 1.4.0.9 Copyright(C) 2003,2004,2005. Hitachi, Ltd.
>>>>>>>>>>>>>>> hfcldd0
hfcldd0 HITACHI FC Adapter
*** NOTICE *** NOTICE *** NOTICE ***
The microcode installation occurs while the
adapter and any attached drives are available
for use. It is recommended that this installation
be scheduled during non-peak production periods.
As with any microcode installation involving
drives, a current backup should be available.
Use 'y' to continue the installation.
Use 'n' or Ctrl-c to cancel the installation.
(Y/N) : y
--- The current microcode level for 220742(hfcldd0)
--- Select microcode file: /home/okamoto/54100A30.220742.EF.500008700030F17A.BK
File
WWN=50000870 0030F17A
Target WWN=50000870 0030F1B6
Input data error.(WWN is wrong)
>>>>>>>>>>>>>>> hfcldd1
hfcldd1 HITACHI FC Adapter
*** NOTICE *** NOTICE *** NOTICE ***
～～～ Omission ～～～
Microcode Update finished.
The Update microcode level for 220742(hfcldd1)
Need reboot the system to update this.
>>>>>>>>>>>>>>> hfcldd2 SKIP(already update)
<Result of all adapter update>
Adapter #1: FAIL (FlASH SYSREV 00220740)
hfcldd0: FAIL
Adapter #2: SUCCESS (FLASH SYSREV 00220740 -> 00220742)
hfcldd1: SUCCESS
hfcldd2: SKIP
#
(3) After the FLASH-ROM update is successfully completed, you need to transfer the
FLASH-ROM data. Refer to the example 1.
Update failed because the specified backup file and
WWPN of the adapter port does not match
'hfcldd2' belongs to the same board as hfcldd1.
FLASH-ROM data has already updated as
'hfcldd1', so update is skipped for hfcldd2.
Display the result at the end of the command.
53
Advertisement
Table of Contents
