Management Module Indicator Codes; Locating The Information Tag Of Your System - Dell EMC PowerEdge MX7000 Installation And Service Manual

Management module indicator codes

Figure 11. Management module indicators
1 Status indicator, Identification button/ Indicator -
Dual color: Blue and amber
Table 7. Management module indicator behavior
Status
Healthy chassis/ Management module
(Standby)
Healthy chassis/ Management module (Active)
Healthy chassis/ Management module
(Identifying mode)
Faulty chassis/ Management module (Active)
Faulty chassis/ Management module
(Identifying mode)
Failed chassis/ Management module: Mode 1
Failed chassis/ Management module: Mode 2

Locating the information tag of your system

You can identify your system using the unique express service code and Service Tag. Pull out the information tag in front of the system to
view the express service code and Service Tag. Alternatively, the information may be on a sticker on the back of the system chassis. The
mini Enterprise Service Tag (EST) is found on the back of the system chassis. Dell uses this information to route support calls to the
appropriate personnel.
2 Power indicator - Green
Indicator combination
Power indicator ON (green), status indicator OFF
Power indicator ON (green), status indicator blue ON
Power indicator ON (green), status indicator blue blinking
NOTE: Available only when the management module is active.
Power indicator ON (green), status indicator amber blinking
Power indicator ON (green), status indicator blue blinking
Power indicator OFF, status indicator OFF
NOTE: Hardware failure prevents the management module from powering.
Power indicator OFF, status indicator Amber-solid
NOTE:
• The management module starts boot but is unable to boot to one or more
operating system partitions.
• The management module boots but detects a failure such as a network
switch failure, or a voltage regulator failure.
Enclosure overview 19