Initial System Setup And Configuration; Setting Up Your Enclosure; Management Module Configuration; Options To Set Up The Management Module Ip Address - Dell EMC PowerEdge MX7000 Installation And Service Manual

Setting up your enclosure

Complete the following steps to set up your enclosure:
1 Unpack the enclosure.
2 Install the enclosure into the rack. For more information, see the Rail Installation Guide at Dell.com/poweredgemanuals.
3 Connect the peripherals to the enclosure.
4 Connect the enclosure to its electrical outlet.
5 Power on the enclosure by pressing the power button.
NOTE: You can configure the static or DHCP IP address using the touch panel on the
chassis.
6 Power on the attached peripherals.
For more information about setting up your enclosure, see the Getting Started Guide that shipped with your enclosure.

Management module configuration

Using the management module (MM), you can manage SAS storage subsystem, drive assignments, and monitor the health status for the
associated SAS devices. You can manage SAS fabric by using the OpenManage Enterprise-Modular user interface to view inventory,
storage event logs and manage drive or enclosure assignments. For more information about managing the SAS fabric using OpenManage
Enterprise-Modular, see OpenManage Enterprise-Modular User's Guide available at
Controllers.

Options to set up the management module IP address

Configure the initial network settings on your network infrastructure to enable the communication to and from the management module.
NOTE: For static IP configuration, you must request for it at the time of purchase.
Use the OpenManage Essentials Quick Deploy feature to assign a static or DHCP IP address.
Interfaces Document/Section
Dell Deployment See Dell Deployment Toolkit User's Guide at
Toolkit
Dell Lifecycle See Dell Lifecycle Controller User's Guide at
Controller
OpenManage See Dell OpenManage Enterprise-Modular User's Guide at
Enterprise Modular Controllers
Server LCD panel See the

Initial system setup and configuration

LCD touch-panel section.
Dell.com/openmanagemanuals
Dell.com/openmanagemanuals
Dell.com/idracmanuals > Lifecycle Controller
Dell.com/openmanagemanuals
Initial system setup and configuration
> Chassis Management
> OpenManage Deployment Toolkit
> Chassis Management
4
21