Removing A Management Module Blank - Dell EMC PowerEdge MX7000 Installation And Service Manual

Figure 35. Installing a module into Fabric C slot
Next step
1 Connect the cables to the module.
NOTE: Ensure that the SAS IOMs have the same firmware version. The OpenManage-Enterprise modular User interface allows
you to view the firmware details. For more information, see

Removing a management module blank

Steps
1 Press the release button to release the blank.
2 Pull the blank out of the enclosure.
NOTE: To maintain proper airflow, ensure that the blanks are installed if the management module is not
installed.
48 Installing and removing system components
OpenManage Enterprise-Modular User's Guide .