Hot Plug And Non-Hot Plug Devices; Storage And Compute Sleds; Removing A Sled Blank - Dell EMC PowerEdge MX7000 Installation And Service Manual

Hot plug and Non-hot plug devices

Table 9. Hot plug devices
Hot plug devices
Cooling fans
Power supply units
Management services modules
Fabric A/ B/ C input output modules
Sleds
NOTE: Ensure that the sled is powered off before
removing it from the enclosure.

Storage and compute sleds

Removing a sled blank

Prerequisite
1 Follow the safety guidelines listed in
Steps
1 Press the release button to release the sled blank.
2 Pull the sled blank out of the enclosure.
CAUTION: Ensure to install a sled blank in all the empty bays. Operating the enclosure without a blank results in
overheating.
26 Installing and removing system components
Safety instructions.
Non-hot plug devices
Main distribution board
Vertical power distribution board
Rear fan board
Left and right control panels