Configuring The Static Ip Address Using The Lcd; Configuring The Dhcp Ip Address Using The Lcd - Dell EMC PowerEdge MX7000 Installation And Service Manual

Steps
1 To set up the IP address out-of-the-box:
1 Select the Language, and tap Next.
The select Home Page screen is displayed.
2 Tap Preview, to view the default Home page view.
The available Home page views are:
• Main Menu
• IP Settings
• System Info
• Custom Text String
The Home Page Preview screen is displayed.
3 Tap Save to store the settings.
NOTE: You can tap Home Pages to view the selected Home Page screen.

Configuring the Static IP address using the LCD

1 The PowerEdge MX7000 enclosures LCD touch panel enables you to configure the Static or the DHCP IP address.
To configure the Static IP address:
1 From the selected home screen, tap Settings.
2 Tap Network Settings.
3 Select IPv4, and tap Edit.
The Change IP settings from DHCP to Static? screen is displayed.
4 Tap Yes.
5 Update the IPv4 octet, and tap Next.
6 Edit the Mask octet, and tap Next.
7 Edit the Gateway octet, and tap Save.
The Success screen is displayed.
NOTE: If the IP address is incorrect, an Error screen is displayed.

Configuring the DHCP IP address using the LCD

1 To configure the DHCP IP address:
1 From the selected home screen, tap Settings.
2 Tap Network Settings.
3 Select IPv6 and, tap Edit.
The Change IP settings from DHCP to Static? screen is displayed.
4 Tap Yes.
5 The network IP address is automatically updated in the enclosure.
The Success screen is displayed.
NOTE: If the IP address is incorrect an Error screen is displayed.
24 Initial system setup and configuration