Parameter Setting By Gx Works2 - Mitsubishi Electric Melsec Q Series User Manual

6
PARAMETER SETTING

6.7 Parameter Setting by GX Works2

Set output status at the time of CPU stop error, redundant system support function, and
QJ71PB92D-compatible function.
(1) Output status setting for the case of a CPU stop error
(2) Redundant system support function and QJ71PB92D-compatible
6
- 23 6.7 Parameter Setting by GX Works2
(a) For the QJ71PB92V
For the setting method, refer to Section 4.6.
(b) For the QJ71PB92D-compatible function
For how to set, refer to (2) in this section.
function
The following setting should be made only when using the redundant system support
function or QJ71PB92D-compatible function.
POINT
When setting intelligent function module switch setting, set either redundant
system support function or QJ71PB92D-compatible function.
The redundant system support function cannot be used together with the
QJ71PB92D-compatible function.
(a) Start procedure
1) Double-click "PLC parameter" in the project window of GX Works2.
2) Enter I/O data on the I/O assignment window, and click the
button.
(b) Setting items
Figure 6.14 Intelligent Function Module Switch Setting window
Switch setting