Mitsubishi Electric Melsec Q Series User Manual page 259

7
PROGRAMMING
(2) Precautions
(a) Operation mode change
(b) Timing for turning ON an output signal of the QJ71PB92V
(c) When using "ON for 1 scan only after switching system from standby to control"
To change the operation mode of the QJ71PB92V, set the redundant CPU in
Separate or Debug mode and refer to the program example in Section 7.1.1 (2)
(c).
For precautions for changing the operation mode of the QJ71PB92V, refer to
Section 6.2.
Do not turn ON any output signal of the QJ71PB92V in the timing of "ON for 1
scan only after switching system from standby to control" (SM1518). (No
processing is performed.)
(SM1518)
Use of a rise execution instruction is not allowed. (Example: MOVP, PLS, etc.)
7.9 Program Examples for Use in the Redundant System
1
2
3
4
5
6
7
8
7
- 70