Mitsubishi Electric Melsec Q Series User Manual page 26

2
SYSTEM CONFIGURATION
2
- 2 2.1 Applicable System
(b) When mounting to remote I/O station of MELSECNET/H
The following shows the mountable network modules, No. of mountable modules,
and mountable base unit of the QJ71PB92V module.
Power shortage may occur depending on the combination with other mounted
modules or the number of mounted modules.
When mounting modules, pay attention to the power supply capacity.
When the power shortage occurs, review the combination of modules to be
mounted.
Table2.1 When mounting to remote I/O station of MELSECNET/H
Mountable network
module
QJ72LP25-25
QJ72LP25G
QJ72LP25GE
QJ72BR15
* 1 Limited to the range of the number of I/O points in the network module.
* 2 Mountable on any I/O slot of the mountable base unit.
Remark
The Basic model QCPU cannot create the MELSECNET/H remote I/O network.
No. of mountable
Main base unit of
*1
modules
remote I/O station
Up to 64
*2
Mountable base unit
Extension base unit
of remote I/O station
: Mountable, : Not mountable