Mitsubishi Electric Melsec Q Series User Manual page 186

6
PARAMETER SETTING
(2) Number of automatic refresh parameter settings for the QJ71PB92V
Figure 6.12 Number of Automatic Refresh Parameter Settings (When Set by "Block Transfer")
6
- 21 6.6 Automatic Refresh Parameters
6.6.4 Number of set automatic refresh parameters
The number of automatic refresh parameter settings for the QJ71PB92V varies
depending on the automatic refreshing setting method for I/O data.
(a) When "Block Transfer" is used
When the automatic refresh of I/O data is set by "Block Transfer" (i.e. I/O data of
all DP-Slaves are refreshed into the same kind of device), up to five automatic
refresh parameters can be set per QJ71PB92V.
Up to 5 automatic refresh
parameters can be set.