Mitsubishi Electric MELSEC iQ-R Series User Manual page 77

"Devices on the Network" window
The "Devices on the Network" window detects IO devices on the network and sets the names of the IO devices and TCP/IP
settings.
[Network]  [Online Action]
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
No. Item
(1) Number of Nodes on the
Network
(2) Network Nodes Table
(3) Scanning
(4) MAC Address
(5) Device Type
(6) [Factory Reset] button
(7) Name
(8) Permanent Name
(9) Addressing Mode
(10) DHCP Based on
(15)
Description
Displays the number of nodes detected by "Network Detection".
Displays results of "Network Detection".
This area displays the name, IP address, type, and MAC address of each IO device.
Select whether or not to update "Network Nodes Table".
• Selected: "Network Nodes Table" is updated every 3 seconds.
• Not selected: "Network Nodes Table" is not updated.
Displays the MAC address of a selected IO device.
Displays the type of a selected IO device.
Restarts a selected IO device with the factory default setting.
"Request Status" displays execution results.
Displays the name of a selected IO device.
To rename the selected IO device, enter a new name and click the [Apply Name] button.
"Request Status" displays execution results.
Sets to save a new name of the IO device in the non-volatile memory or volatile memory of
the IO device.
• Selected: Saves a new name set in "Name" in the non-volatile memory of the IO device.
Even when the IO device is restarted, the new name remains.
• Not selected: Saves a new name set in "Name" in the volatile memory of the IO device.
When the IO device is restarted, the new name is discarded and the default name is
restored.
Select one of the following modes.
• DCP: The RJ71PN92 can change the TCP/IP settings of IO devices.
• DHCP: Not supported in the RJ71PN92.
• Local: Not supported in the RJ71PN92.
Not supported in the RJ71PN92.
(18)
*3
*1
(16)
(9)
(10)
(11)
(12)
(17)
(13)
(14)
Setting range


• Selected
• Not selected
(Default: Selected)



Up to 240 one-byte
alphanumeric characters
(Default: Name of the
current IO device)
• Selected
• Not selected
(Default: Not selected)
DCP
(Default: DCP)

3 GX Configurator-PN
3.1 Window Structure
3
*2
75