Mitsubishi Electric MELSEC iQ-R Series User Manual page 85

Item
Device Name
Description
*1 IO device IDs are used to manage IO devices.
When buffer memory areas are used and their bits need to be specified for each IO device, the specified bits are used to distinguish
each IO device.
*2 Characters from a to z, numbers from 0 to 9, "." (dot), and "-" (hyphen) can be used. "-" cannot be used at the beginning and end of the
name.
The name can be separated by ".". The number of characters in each separated part is limited to 63 or less.
When an IO device has been added by "Network Detection", its IP address and name are registered
automatically. When an IO device has been added from "Device Library", manually enter its IP address and
name.
For the operations on "Network Detection" and "Device Library", refer to the following.
Page 73 Network Detection
Page 68 Device Library
Description
Sets an IO device name used for the PROFINET communications.
This name should be the same with the name set on the "Devices on the
Network" window in GX Configurator-PN. ( Page 75 "Devices on the
Network" window)
Displays the description of the selected item.
Setting range
Up to 240 one-byte alphanumeric
*2
characters
(Default: Name of the current IO
device)

3 GX Configurator-PN
3.1 Window Structure
3
83