Installing The Print Cartridge - Sharp UX-A1000 Operation Manual

Installing the Print Cartridge

Follow these steps to install or replace the print cartridge.
♦
When replacing the print cartridge, be sure to use a SHARP UX-C70B
cartridge.
Print cartridge yield (at 4% coverage)
Initial cartridge
Ink Save mode ON:
Ink Save mode OFF: Approx. 200 letter pages
Replacement cartridge (SHARP UX-C70B)
Ink Save mode ON:
Ink Save mode OFF: Approx. 400 letter pages
Ink Save mode is initially turned off. To turn on Ink Save mode, see page
23.
Caution!
Do not open the print compartment cover of the machine while it is printing. If
opened while printing, printing will stop.
Note: Keep ink cartridges sealed in their packages until you are ready to install
them. It is recommended that you do not use a cartridge that has been left unused
for a long time after opening, as the print quality may be considerably degraded.
♦
Make sure the power cord of the machine is plugged in and paper is loaded
before installing or replacing the print cartridge.
1
Open the operation panel.
If PRINTER ERROR or PRINTER ERROR/CHECK PAPER appears...
In the event that the display shows either of the above messages, you must clear the
error before installing the print cartridge. The error can usually be cleared by opening
and closing the print compartment cover (see Step 2), or if a paper jam has occurred,
by removing the paper jam (see page 121).
Approx. 300 letter pages
Approx. 600 letter pages
Installing the Print Cartridge
17