Connecting The Telephone Line Cord - Sharp UX-A1000 Operation Manual

Connecting the Telephone Line Cord

Connecting the Telephone Line Cord
Insert one end of the line cord into the jack on the back of the machine
marked TEL. LINE. Insert the other end into a standard (RJ11C) single-line
wall telephone jack.
Setting the dial mode
The fax machine is set for tone dialing. If you are on a pulse dial line, you must
set the fax machine for pulse dialing. Press the panel keys as follows:
1
Press FUNCTION
2
Press
3
Press
4
Select the dial mode:
TONE:
1
5
Press
STOP
24
once and
once and 4 times.
once.
PULSE:
2
to exit.
3 times.
Display:
OPTION SETTING
DIAL MODE
1=TONE, 2=PULSE
The display briefly shows
your selection, then:
DISTINCTIVE