Sharp UX-A1000 Operation Manual page 48

Override Ringing
2
Press
3
Press .
4
Press the number keys to enter a 3-digit override code.
START/
5
MEMORY
Press
date and time display.
Overriding the answering system
Your callers should follow the steps below to override the answering system.
1
The caller calls your machine from a touch-tone telephone. When the
outgoing message begins, they should press the
telephone.
•
The caller will hear a short beep, and the outgoing message will stop.
2
The caller should enter the override code and
appropriate keys on their telephone.
•
If an incorrect code is entered, the caller will hear four beeps. He or she
must re-enter the correct code within 10 seconds or the line will be
disconnected.
3
Your machine will make a special ringing sound. Pick up the handset to
answer the call.
•
If you do not answer within 30 seconds, the outgoing message will play
again and the caller can leave a message.
46
once and 3 times.
to store the override code, and then
OVERRIDE CODE
to return to the
STOP
key on their
by pressing the