Speed Dialing - Sharp UX-A1000 Operation Manual

Speed Dialing

Speed Dialing can be used to dial any number that has been stored as a
Speed Dial number.
1
Load the document(s).
•
If desired, press
the resolution and/or contrast.
2
Press
SPEED DIAL
•
For example, to enter Speed Dial 19, press
3
Check the display. If the name or number shown is correct, press
START/
MEMORY
. (If not, press
•
If the transmission is completed successfully, the machine will beep once.
•
If an error occurs, the machine will beep three times and print a Transaction
Report to inform you of the problem (see page 102).
Using a Speed Dial number for a voice call
To use a Speed Dial number for a voice call, lift the handset, press
and enter the Speed Dial number.
to set
RESOLUTION/
RECEPTION MODE
and then enter the 2-digit Speed Dial number.
and repeat Step 2.)
STOP
Sending a Fax by Automatic Dialing
READY TO SEND
.
1 9
,
SPEED DIAL
67