Table of Contents
Advertisement
- Network setting
Select whether the target station for remote programming or remote monitor is on the
standard network connection or on the extension network connection.
In the case below, 10 to 12
network connections.
10
(8)
ME-NET
<Standard network connection>
Set "standard" in network configuration.
Set "ME-NET" in target station model.
Set the target station number (00 to 77
< Expansion network connection >
Set "extension" in network configuration.
Set "ME-NET" in junction station model.
Set the target station number "ME-NET."
Set the target station number (00 to 77
(In the case of the above figure: 02
Set the junction station number (00 to 77
(In the case of the above figure: 12
Set the junction station rack number.
(Keep the initial value "0" )
Set the station slot number.
Set the installed slot number of the master station
on the target station side. In the case of the above
figure: 3.
are standard network connections. 01 to 03
(8)
(JW-50PG)
12
(8)
11
(8)
0
1
2 3
ME-NET
Slot number
).
(8)
).
(8)
)
(8)
).
(8)
)
(8)
16-15
are extension
(8)
(Junction station)
Target station
00
(8)
01
02
(8)
(8)
03
(8)
16
Advertisement
Table of Contents
