Connector Crimping Procedure - Sharp JW-21MN User Manual

6-2 Connector crimping procedure

Required tools: Hand-held crimping tool
Model
Dice No.
Crimping width
Connector: ME-GP-01
Processing procedure
Put through a sleeve to an end-processed high
frequency coaxial cable.
Insert a contact into the internal conductor and crimp.
Put a contact into dice having a
diamond shape and closely stick its
end surface with the insulator and the
dice. Pull the moving frame to the
fixing frame side and crimp until the
ratchet is removed.
(Crimping width: 2.2 mm)
* Use the crimping tool in the direction
shown in the illustration right.
Using the crimping tool in the reverse
direction will not crimp correctly.
To the next page
: ME-42H
: 67-42H
: 10 mm
<Insert a sleeve>
<Crimping contact>
Widen a little Crimp Dice blade shape
2.2 mm
Closed contact
6-5
Connector parts
Sleeve Contact
A:10±0.5mm
B: 4±0.5mm
Internal conductor
Crimping dice
TT - 237
Moving frame
Crimping dice
Insulator
TT TT - 237 237
Shell
A
B
6
Sleeve
Contact
Fixing frame
Contact
Closed
contact